Carbon Fiber Wrap (CFF)

Want to give your hood, interior trim, engine components and any surface the carbon fiber look? Get high quality DecalWerks Carbo-Noc and 3M� DI-NOC� adhesive-backed carbon vinyl!

Starting At Only
$ 15
  • GreatCustomer Service
  • FreeShipping Eligible
  • BasicInstallation

Satisfaction Guaranteed!

   LEARN MORE

Features and Benefits Of This Product

3M� DI-NOC�, Japan-made product, is a top quality vinyl film for 3M�. The vinyl can be applied on almost any surface, regardless of the curve angles. From the interior/exterior of your car to the back of your laptop, application is almost limitless.

DecalWerks Carbo-noc is the alternate of the 3M Di-Noc product. Both products are almost identical in every way, including: look, quality, adhesion, longevity, flexibility, malleability, heat and weather resistance.

Though Di-Noc and Carbo-Noc products are nearly identical in every way, there are two main differences between them:
1) Roll width: Di-Noc is available in max 4 foot width. Many vehicle panels such as hoods require a 5 foot span of material. All Carbo-Noc is sold in 5 foot widths unless otherwise specified.
2) Cost: Since Di-Noc is made by an international conglomerate, costs are quite high. Carbo-Noc is made especially for DecalWerks by another well-known factory, however, without the heavy price tag.

Cautious selection is important when considering a brand that is not 3M or DecalWerks. In the case of DecalWerks, they applied thorough evaluation on samples coming from 15 different factories to get the best. While all the materials all looked the same, and some of the materials were considerably cheaper, they did not have the important properties such as adhesion, flexibility, air release backing, malleability, longevity and others that are required for a quality installation.

Both products:
� bring a dry carbon look. This product has a three-dimensional texture, not printed carbon fiber patter, which allows reflecting light just like real carbon fiber would, making it the closest alternative to carbon fiber when you just want carbon fiber look without the high price tag of real Carbon fiber.

� have a matte texture contrary to the usual glossy carbon fiber look, giving your vehicle a unique look that stand out from the crowd.

� can be installed with a heat gun or hairdryer so that they may melt slightly and mold to the form of any surface.

� can be used both interior and exterior. The material has been tested to last about 3-4 years outdoors and 12 years indoors, and water resistant.

� have been tested to stick fast to metal, glass, plastic, and even itself. It can be applied to your hood, interior trim, engine components and more!

� have air release channels for fast, easy, and virtually bubble-free application.

� adhesive that can be enhanced by warming the material with a hair dryer or heat gun.

Installation Notes

Please note that DI-NOC finishes are removable. The surface underneath may possibly damage, but this is not common. DI-NOC should generally be considered a permanent application.

NOTE: While the adhesive on the back of this material is quite strong, 3M recommends the use of 'Primer 94' to increase the adhesion of the DI-NOC to your surface, especially for overlays with tight edges or pieces that will be exposed to high heat. Primer 94 is a light bonding primer that you brush on the edges, corners, and uneven surfaces of your substrate. Since Primer 94 is considered a hazardous material by shipping companies, we are unable to sell this primer through our website. Primer 94 is available at most local sign shops. While we expect this to be a very uncommon problem, 3M requires that all claims due to the material not adhering to your surface should be submitted along with the proof of purchase of Primer 94 from your local store.


Installation Difficulty: BASIC - Simple Tools, No Special Knowledge Required

Warranty + Satisfaction Guarantee

These items are no longer valid for returns once the material has been removed from its baking paper or cut into smaller pieces.

We are unable to provide warranty on this product because the longevity and adhesive qualities of this material may vary depending on the preparation and installation procedures.

Complimentary or Alternate Products

Need help in installation? Bimian now offers a Di-Noc installation service. Please see for BMW for more information.

This Product Fits

E21 - BMW 3 Series - 1975-83, E23 - BMW 7 Series - 1977-87, E24 - BMW 6 Series - 1977-89, E28 - BMW 5 Series - 1982-88, E30 - BMW 3 Series and M3 - 1984-91, E31 - BMW 8 Series - 1990-98, - BMW 7 Series - 1986-–-1994, E34 - BMW 5 Series and M5 - 1989-96, E36 - BMW 3 Series and M3 - 1992-98, E38 - BMW 7 Series - 1995-02, E39 - BMW 5 Series and M5 - 1997-03, E46 - BMW 3 Series Coupe, Sedan, Convertible and M3 - 1999-2006, E60/E61 - BMW 5 Series and M5 - 2004-2009, E63/E64 - BMW 6 Series and M6 - 2004-2010, E65/E66/E67 - BMW 7 Series - 2002-2008, E70 - BMW X5 and X5M SAV - 2007-2013, E87/E81 - BMW 1 Series Hatchback Sedan - 2004-2010, - Audi A3 (1996-2003) - 8L, - 8P - Audi A3 (2004 and up), E90/E91 - BMW 3 Series Sedan and M3 - 2006-2012, E92/E93 - BMW 3 Series Coupe and M3 - 2007-2013, - B5 - Audi A4 or S4 or RS4 (1995-2002*), - B6 - Audi A4 or S4 (2003-2004*), - B7 - Audi A4 or S4 or RS4 (2005 and up*), - C4 - Audi A6 or 100 or URS4 or URS6 (1990-1996), - C5 - Audi A6 or S6 or RS6 or allroad (1998-2004*), - C6 - Audi A6 or S6 (2004 and up*), - D2 - Audi A8 or S8 (1994-2002), - D3 - Audi A8 or S8 (2003 and up*), - BMW M1 - 1978-81, R53 - Mini Cooper and up Cooper S - 2001-2006, Other, - Q7 - Audi Q7 SUV, - TT - Audi TT, , E83 - BMW X3 SAV - 2003-2010, E53 - BMW X5 SAV - 2000-2006, E37 - BMW Z3 Roadster and MZ3 - 1997-02, E85 - BMW Z4 and Z4M Roadster and Coupe - 2003-2008, E52 - BMW Z8 Roadster - 2000-2004, E52 - Mini Cooper and up Cooper S - 2007 and up, E71 - BMW X6 and X6M SAV - 2008-2014, E82/E88 - BMW 1 Series Coupe & 1M - 2007-2012, R50 - MkI MINI One, Cooper, Convertible and S, R53 - Mini Cooper S & JCW - 2001-2006, R56 - MkII MINI Cooper, Convertible, E, D and Cooper S, R55 - 2007 and up Clubman and D, E89 - BMW Z4 Roadster / Coupe - 2009 and up, F01/F02/F03/F04 - BMW 7 Series - Sedan 2009 and up, F06 - BMW 6 Series GranCoupe GC - 2013 and up, E84 - BMW X1 - SAV 2010 and up, F10 - BMW 5 Series Sedan and M5- 2010 and up, F30/F31/F34/F80 - BMW 3 Series Sedan and M3 - 2012 and up, F13/F12 - BMW 6 Series Coupe / Convertible and M6 - 2011 and up, R6 - Mini Cooper Coupe - 2011 and up, R58 - 2012 and up Coupe and Roadster, F25 - BMW X3 - SAV 2011 and up, F20/F21 - BMW 1 Series - Sedan and up Hatchback 2012 and up, F07 - BMW 5 Series GT - 2010 and up, F32/F33/F36/F82 - BMW 4 Series Coupe and M4 - 2014 and up, F15 - BMW X5 SAV 2014 and up, F22/F45 - BMW 2 Series Coupe - 2015 and up, F26 - BMW X4 - SAV 2014 and up, I3 - BMW i3 - Electric 2014 and up, I12 - BMW i8 - Electric 2014 and up,

Notes / Warnings

No return policy is applied for this custom-cut product.

Please check your local laws for ensure legality when using this product on public roads and highways. In areas where this product is not legal for road use it is sold strictly for off-road, track or show use only.

Click To Ask A Question










Sorry, No Reveiws Yet.

Installation Difficulty

BASIC - Simple Tools, No Special Knowledge Required